Gps Circuits Projects
How can Interface a GPS reciever with mobile unit?
We are making a project on GPS, but we want transmit the signal of gps reciever into mobile unit
If there is any circuit that can act as a interface between these two unit, by using NMEA protocol,
OR
any software which can act as autopilot
please give answer
It depends on the GPS receiver. Not all GPS receivers will output the data through some data port. But a lot of them do (e.g. NMEA). You’ll have to check the specs for the receiver.
|
|
Ultrasonic Module HC-SR04 Distance Sensor For Arduino $7.61 There are 4 pins out of the module : VCC , Trig, Echo, GND . So it’s a very easy interface for controller to use it ranging. The all process is : pull the Trig pin to high level for more than 10us impulse , the module start ranging ; finish ranging , If you find an object in front , Echo pin will be high level , and based on the different distance,it will take the different duration of high l… |
|
|
SparkFun Inventor’s Kit for Arduino, a professional kit for Arduino $94.95 sparkfun sku: KIT-10173 Description:This kit has it all. It now includes the new Arduino Uno, the fabled baseplate, and all the sensors you can shake a stick at. The SparkFun Inventor’s Kit for Arduino is a box of goodies to get the very beginner started with programmable electronics. It includes all the bits you need to build 12 basic circuits, no soldering required! On top of that, Sparkfun hav… |
|
|
Programming and Customizing the Multicore Propeller Microcontroller: The Official Guide $26.69 The Only Official Guide to the Parallax Multicore Propeller Microcontroller Written by a team of Propeller experts, this authoritative guide shows you how to realize your design concepts by taking full advantage of the multicore Propeller microcontroller’s unique architecture. The book begins with a review of the Propeller hardware, software, and Spin language so you can get started right away. Pr… |
